Have a question about our timber products, or want to know more about our processes?
Use the form below to submit your question. It will be promptly reviewed and answered by our technical team.
This customer had the flexibility to use 2 bridges 20' long with a center support. The channel in this case is a winter flow only, there is no cause for concern on the center support scouring out with the flow. We supplied the bridges...
This residential bridge we supplied to a customer to access a large home adjacent to a large drainage ditch. The bridge was supplied in 2 pieces 7' wide x 24' long. It has a capacity to carry virtually anything required at the residence, including...
Here is one of our quick deploy Timber Bridges, ready in 2 pieces 7' wide and 20' long with the curbs already in place, all completely built. The customer will build their own abutment, in this case using cement lock blocks on a gravel...
In the outback of British Columbia we have a lot of Forestry Road Bridges. Sometimes they are concrete reinforced panels. These panels have galvanized rods sticking out each side. To maximize driving surface (width) the holding blocks, riser blocks and curbs are mounted in...
These 12" x 48" x 20' Crane Mats were placed on top of a Bridge Deck for a wear surface. The bridge is in an industrial site and was getting beat up by constant heavy truck traffic. This will extend the life of the...
Check out this installation of a 14' wide x 20' long Timber Bridge, supplied in 2 pieces. The installation was accomplished with a bridled lift at the integral lifting plates, clevis's are included, into the left and right position. The 2 pieces are placed...
This is an isolated Timber Trail Bridge, not accessible with a crane or hiab truck. We shipped the customer the bridge completely in pieces, with a drawing, and they put it all together on site. They used an ATV with a timber wagon (wheels...
This nice little bridge was installed on a "hike in" trail with no road access. We supplied the parts as a kit, all cut to size, supplied with an instruction drawing. Our customer used a Ute vehicle (ATV with long wagon) to get the...
This is an "Air Bridge" which is kind of a funny name, but it is used for heavy machinery to cross over an industrial gas line (or any buried utility) and provides an air gap between the pipe line and the equipment. Basically it...
This bridge spans 26' across a large ditch, it is built narrow (in width) to prevent road vehicles from traveling on it, but it is wide enough for any Golf Cart, ATV or lawnmower tractor to cross. Rated at 5000 kg you could fit...
We supplied this customer with Douglas Fir #1 and btr precut guardrail risers and rails. In this case 10" x 10" all pre drilled and pre cut to length. Installations go much faster when everything is ready to go.
Here is a customer's small Farm Bridge, built from CCA treated Hemlock. 8' wide it is sufficient to get a mower and some utility vehicles across. All cuts were made before incizing and treating. This bridge will be around for many years!
