Have a question about our timber products, or want to know more about our processes?
Use the form below to submit your question. It will be promptly reviewed and answered by our technical team.
Here are 2 ATV-Golf Cart-Horse-pedestrian bridges; the small one is 8" x 84" x 144" long (with a handrail kit) and the longer one is 84" x 84" x 26' long. (with attached curbs) These are fully assembled and going to separate locations in...
We pre-cut Douglas Fir Timber Parts for this concrete bridge re and re on the curbs. These bridges have pre-installed rods sticking out of the sides embedded in cement. We precut the bottom risers to attach to the bridge and then the top risers...
What? Square Bridges? These are real puddle jumpers, only 14' long which means an actual 12' of span, they are supplied to a customer that has to cross a small waterway 3 times on the same road. Supplied as 2 halves, the bridges are...
These Specialty Douglas Fir timbers are for the refurbishment of a bridge deck. The large section pieces are 10-5/16" x 12" x 13' long, special cut. Deck boards are 3" x 12" x 16'.
Rated at 5000kg this 26' long bridge is built narrow so no motor vehicles can drive on to it. It is 7' wide and has a 42" high handrail and spans a full 24'. Built with treated Douglas Fir #1 and btr material it...
We delivered 3 bridges today, they are made in 2 sections, pre built into a "kit" and installed very quickly on site. These bridges are rated BC-CL625 for standard highway loading. These bridges have 4 pick up points for easy install with a crane...
We had 2 bridges loaded out today. The left and right side of the bridge are all pre-assembled. On site the customer has their contractor build the abutment and then sits the 2 sides together and slides a bolt through both sections locking the...
Customer bought this property for subdivision potential. The old bridge in place was condemned and would not support service vehicles or cement trucks. We supplied a BCFS L100 (90,000 kg rated) Timber Bridge in 3 parts for installation. Old bridge was removed, old abutments...
We supplied this bridge to a local contractor who needs to access the back end of a Golf Course in Surrey. The golf course is doing a housing development. All vehicles, from cement trucks to excavators to plumbers and electricians will access the site...
This is a 2 part 14' x 30' long Heavy Duty Bridge that has been purchased by a Utility Company and is being deployed for 6 months for access to a transmission line and then deployed in a different area for access to a...
Industrial Timber Products supplied a bridge to a customer in the Harrison area with a fully assembled bridge, supplied in 2 pieces 7' wide and 20' long. We also supplied 2 "mat sills" ready for installation.
The bridge spanned a small creek on a rural...
