Have a question about our timber products, or want to know more about our processes?
Use the form below to submit your question. It will be promptly reviewed and answered by our technical team.
This giant timber wedge was 40" at the heel, 60" wide and 40' long. They feature fully engineered lifting hardware and a steel encapsulated toe. The special job was on a complex highway project where most of the lifts taking place were on 8%...
These custom sized mats which are 12" x 60" x 90" and 12" x 60" x 132" are being used on a trestle, they have to be perfectly sized in order to fit in a metal frame. We used a narrow dap so that...
Sometimes it is desirable to protect the pavement and cement sidewalk! This is a big machine that is sitting on these Crane Mats, no damage is done!
This excavator is "vibrating" in soldier "H" piles with a vibro pile driver on a residential job site. This job site happens to be a peat bog. The H piles on this job go to 20' deep and will have lagging (generally 4" x...
These 12" x 48" x 20' Crane Mats were placed on top of a Bridge Deck for a wear surface. The bridge is in an industrial site and was getting beat up by constant heavy truck traffic. This will extend the life of the...
These mats are going to a customer in Washington for use on a Wind Farm project. These are fine looking mats, straight, square, flat topped, no wane and are built with 6 rods 1-1/4" diameter. They have notches or daps in the end for...
These helicopter hooks can be installed in the corner of Access Mats so they can be bridled and flown into a remote site by a helicopter. Sometimes the access mat actually acts as the landing pad for the helicopter on a remote site.
Digger mats feature a cable from the top of the mat for dragging the mats into position, typically with an excavator. Sometimes if the mats are used as just support mats (like a Crane Mats) the mats can be flipped over and the cables...
these are 12" x 48" x 30' long Heavy Duty Crane Mats. Important points are flat top construction so that a Large Crawler Crane is not having to cross any "steps" in the mats. When the boom is up on some of these huge...
These 2 BIG Wedges are 36" tall x 36" wide and 120" long with a 2" toe and 36" high at the heel. Used for leveling up a mobile Crane Truck on a severe slope. This slope is about 30%. Notice the yellow Certified...
Here is a project that is using all forms of standard matting, we have Crane Mats on the base (over the geotextile fabric) and then steel Rig Mats lying crosswise on top of the Crane Mats, followed finally by Access Mats on top to...
These Crane Mats are specially made for a customer who does reclamation work on tidal areas. Sometimes the machinery is working right in the water. The cables are designed to always "stick up" so that the machine operator can "find" the mats in deeper...
