Have a question about our timber products, or want to know more about our processes?
Use the form below to submit your question. It will be promptly reviewed and answered by our technical team.
"*" indicates required fields
Metro Vancouver is constructing a 21' diameter tunnel under Burrard Inlet which will container 3 water mains. The tunnel will be 1.1 km long and will be 30 metres below the bottom of Burrard Inlet. The shaft is 60 metres deep on the North...
A new 1 km water supply tunnel is being bored from North Vancouver to Burnaby underneath Burrard Inlet. There are large vertical shafts on each end. We have supplied Crane Mats and Timber Blocking for the project. Here are a few pictures:
When our customer needed to demolish a large dock they needed to come up with a solution for dropping concrete waste onto a floating platform. Floating swamp mats was a quick and efficient answer. They float and they can take a lot of abuse....
Our customer used our Access Mats to bring in a thousand loads of structural fill to a site in Tsawwassen, BC. All the dump trucks ( transfer trucks) used this temporary roadway to avoid any damage to surrounding lands. Access Mats are 8' wide...
Sometimes you need a place to dock the work boat! We supplied 4' wide x 30' long x 12" thick Crane Mats for both a ramp and the floating dock. Quick job!
We supplied these Trestle Mats to create a temporary bridge beside the actual bridge under construction. The temporary bridge provided a safe driving surface for the crawler cranes, redi-mix trucks, and all ancillary vehicles. Once the construction was completed, the temporary bridge was dismantled...
Our customer is rehabilitating a river drainage in North Vancouver. They have to walk a machine carefully up the middle of the river, staying off the bottom away from the sand and gravel. They achieved this by laying down Swamp Mats and carefully working...
Transition Mats - these are being used by a customer to "flatten" a landing zone for a Genie lift. The site is on a steep hill and this was the best value solution to keep the machine flat through many moves. We make interesting...
These Mini-Access Mats are used where a smaller footprint is required. These are 6' wide x 8' long x 3-1/2" thick. 99 bolts. They are 2 ply and are useful for smaller machinery like mini-excavators and bobcats. Better than laying plywood out and discarding...
These transition mats will be used to "flatten" a crane site on a steep hill in the urban jungle. Sometimes our customers can not find a flat place to park a crane for a lift, these wedges will allow a lift on a steep...
This Junttan PMX 22 pile driving rig is sitting on 4' x 20' Crane Mats from Industrial Timber Products. The unit weighs 65,000 kgs and is driving 20m long piles. Ground stability is an important aspect to this job.
Here is a follow up photo of the LR1600 Liebherr 660ton lifting capacity Crawler Crane sitting on Industrial Timber Products mats. The mats are 2 levels thick throughout the site. The curved over-pass beams are arriving on site for assembly. The over-pass will be lifted...
