Hardwood Jack Pads
We manufacture many different Hardwood Jack Pads for a variety of industries. Often the pads are used between steel jacks and the steel equipment to reduce slippage and any scarring. Send us a message if we can help!
Main content
Product Blog
Select Category:
Ship Blocking…..a small Ship anyway!
These 12" x 12" x 24" Heavy Douglas Fir blocks are holding up a sweet 30' Grady White Sportfisher so it can receive bottom paint. This is a typical usage for our heavy blocks from 30' boats to 500' ships. Give us a call...
Outriggers on a Ferry vessel
Our special order Timber Outrigger Pads are featured in this "lift" of the engine pod of a BC Ferry. The pads spread the point load on the deck and ensure nothing gets over-loaded. These Pads are 7" high x 60" x 60" and have...
Outrigger Pads in Yellow!
These Outrigger Pads are for a Concrete Pumping company locally in Vancouver. They will place a steel pad 24" x 48" x 1/2" in the middle of the outrigger. This spreads the point load sufficiently for very heavy lifts.
Crane Pads 7″ x 60″ x 60″
These are 7" x 60" x 60" Timber Crane Pads. They will be deployed for a Grove Crane under the outriggers in a marine environment. Lifting hooks are attached to corners. Rods are 1" and are galvanised. Treatment is CCA and should last many...
Bridge install using Timber Pads on soft ground
Customer required 10' x 10' Timber Outrigger pads because they were working on soft sandy soil. By spreading the point load this pedestrian bridge was installed safely with no safety issues.
Boring Machine – with Crane on ITP mats
Here is a great picture of our Crane Pads in action. You can see the Gwil Crane set up on Transition Mats under the front tires (to level the machine) and then 6' x 12' Crane Pads under the outriggers for ground support. These...
Wide Timber Pads for a bridge lift
A customer required some very wide Timber Pads. These are 10' x 10' x 12" thick. They have 3 through rods 1-1/4" diameter. The lift engineer specified this size of pad to spread the point load of the out-rigger on the crane.
[caption id="attachment_3997" align="alignnone"...
Timber Pads for steel support posts
A customer is supporting a crane on top of a cement slab parking lot. The timber pads expand the point load to reduce the chance of damage. Once the crane has moved off the above slab the steel and timbers will be removed. The...
Heavy Outrigger Pads on a Downtown Seattle Lift
This customer is using Industrial Timber Products heavy timber outrigger pads for a specialised lift.....with a 60t Hydraulic crane sitting on a bridge, at the Washington State Convention Center. It was necessary to spread the point load as much as possible to avoid damage...
Outrigger Pads in Yellow!
These Outrigger Pads are for a Concrete Pumping company locally in Vancouver. They will place a steel pad 24" x 48" x 1/2" in the middle of the outrigger. This spreads the point load sufficiently for very heavy lifts.