Have a question about our timber products, or want to know more about our processes?
Use the form below to submit your question. It will be promptly reviewed and answered by our technical team.
Our customer had a large clam-shell barge unloader that needed to be positioned throughout the barge. The point load weight was too large to be unsupported on the barge floor. We collaborated on the solution with the customer to come up with a 15'...
Our special order Timber Outrigger Pads are featured in this "lift" of the engine pod of a BC Ferry. The pads spread the point load on the deck and ensure nothing gets over-loaded. These Pads are 7" high x 60" x 60" and have...
The Carl family has been involved in the lumber industry for many years, here is a little of our family's history:
Robert McGregor (in picture) married Mabel Carl in 1930. In 1946 he started a company called McGregor Lumber and soon after he formed West...
Customer purchased exact size Douglas Fir #1 and btr Structural timbers to fit his Low Bed trailer. The finished product looks good. The timbers will shrink over time (especially in summer) but with the initial exact sizing the gaps will be small.
Here are a few old photographs of CarlWood from the mid 1980s to mid 1990s. That is Randy with the big chainsaw and a beauty piece of Sitka "stump".
These Outrigger Pads are for a Concrete Pumping company locally in Vancouver. They will place a steel pad 24" x 48" x 1/2" in the middle of the outrigger. This spreads the point load sufficiently for very heavy lifts.
These are 7" x 60" x 60" Timber Crane Pads. They will be deployed for a Grove Crane under the outriggers in a marine environment. Lifting hooks are attached to corners. Rods are 1" and are galvanised. Treatment is CCA and should last many...
These contoured dunnage (Pipe Saddles) are 10" x 10" and feature a "scoop" for 48" outside diameter steel pipe. The key point when making this dunnage is a smooth saw cut and consistent size so the pipes are held "gently" and securely. These saddles...
Douglas Fir 3" x 6" for a boardwalk for ATV's and Dirt Bikes. We S1S this material (surface 1 side) so the deck is perfectly flat. Install the surfaced side down, bandsawn side up for better traction. These pieces are all 6' long. The...
Several trucks of Industrial Timber Products signature Crane Mats are on the way to Saskatchewan for an infrastructure project. Our customers can count on us to have Crane Mats in stock and ready to go. Often Crane Mats are required in a hurry when...
Our customer needed to haul some very heavy transformers through some dense bush, no road was really allowed. A solution was to build these skids, which the transformers were mounted to then they dragged them through the bush and into position. The skids were...
We have a customer who designs and installs work camps and temporary camps. They require a lot of 6" x 6" x 18" Jacking Blocks. We provide these clean cut to length, good grade solid blocks. No rot, no wane, no bugs, no junk!...
